Home
Guitars
Videos
Gallery
Buying an ODD
About
Contact
ODD Blog
|
Atom 3D Printed Bass Guitar
The Atom 3D printed bass guitar: A bass guitar with an internal atom with spinning electrons. The bodies are printed, using Selective Laser Sintering, by 3D Systems in the USA, on an sPro 230 SLS system. The material being used for these guitars is Duraform PA which is a very strong form of Nylon. The resolution for the prints was 0.1mm (which means that each layer that makes up the guitar body is 0.1mm thick). The guitars feature a wooden inner core (choices of Mahogany or Maple, etc.) that links the neck to the bridge, which allows us to customize the sustain and tone of the instrument to suit the musician, and a number of options for hardware, etc.
Price: US$3500, incl hard case, excl shipping.
This includes the following example specifications:
|
Neck |
Warmoth Pro Angled maple neck with rosewood fret board, 22 frets, 34" scale, Corian nut, 6150 sized frets, inlay dots
|
Body |
3D printed Duraform PA outer body, with mahogany inner core, Dyed to your choice of available dye colours, and sprayed with clear matt lacquer
|
Bridge |
Schaller 463, 4 String Roller Bridge, Chrome
|
Pickups |
EMG Hz 35 passive pickups.
|
Tuning heads |
Gotoh GB7 Bass Tuners, Chrome
|
Controls |
Pickup select switch, 2 x Volume knob, 2 x Tone knob
|
Other |
Schaller Strap Locks, D'Addario strings, low-cost hard case for safe shipping (we can, however, also offer you a high quality case as an optional extra)
|
Weight |
4.4Kg |
Each guitar is custom made to order to suit your needs. Click HERE to email us and discuss your requirements. |
Below are pictures of some of the details of the guitar:
|
And, for historical sake, below are some pictures of the very first Atom Bass guitar:
|
The Atom 3D printed bass guitar: A Les Paul inspired bass guitar with an internal atom with spinning electrons. The bodies are printed, using Selective Laser Sintering, by 3D Systems in the USA, on an sPro 230 SLS system. The material being used for these guitars is Duraform PA which is a very strong form of Nylon. The resolution for the prints was 0.1mm (which means that each layer that makes up the guitar body is 0.1mm thick). The guitars feature a wooden inner core (choices of Mahogany or Maple, etc.) that links the neck to the bridge, which allows us to customize the sustain and tone of the instrument to suit the musician, and a number of options for hardware, etc.
Price: US$3500, incl hard case, excl shipping.
This includes the following example specifications:
Neck |
Warmoth Pro Angled maple neck with rosewood fret board, 22 frets, 34" scale, Corian nut, 6150 sized frets, inlay dots |
Body |
3D printed Duraform PA outer body, with mahogany inner core, Dyed to your choice of available dye colours, and sprayed with clear satin polyurethane |
Bridge |
Schaller 463, 4 String Roller Bridge, Chrome |
Pickups |
EMG Hz 35 passive pickups. Active pickups available as option |
Tuning heads |
Gotoh GB7 Bass Tuners, Chrome |
Controls |
Pickup select switch, 2 x Volume knob, 2 x Tone knob |
Other |
Schaller Strap Locks, D'Addario EXL165 nickel wound strings, low-cost hard case for safe shipping (we can, however, also offer you a high quality case as an optional extra) |
Weight |
4.4Kg |
Each guitar is custom made to order to suit your needs. Click HERE to email us and discuss your requirements. |
Below are pictures of the bass:
Atom-B Red
|
|
|